Modern Pulpit and Table

Arc3 lectern and Arc3 water table package (with AR film)

About this Arc3 church pulpit and Arc3 table package 

Get free covers when you order this, our most prestigous pulpit and table combination. 

The Arc3 pulpit and table are a radical departure from traditional geometric shapes. They use organic shapes (non primary shapes). This creates a more flowing appearance and a more dynamic feeling. It reflects the dynamic nature of church preaching. 

Making organic shapes is much harder. It is even more difficult in stainless steel. We estimate that it is about eight times more difficult to make an Arc3 compared with an Arc2. In fact the organic shapes we wanted to make had never been achieved in stainless steel.

For a while we investigated other materials. That would have been much more simple. But other materials are not as durable as stainless steel. We want the pulpit to stand up to the pressure of being used in a church for 20 years and still look good. If we were to use a painted finish, a chip or scratch would need to be retouched. Stainless steel is raw, so a scratch or knock will not be noticed in the same way. Most marks can be removed by carefully rubbing with a heavy duty scotch brite pad from the supermarket (like you would use to clean pots and pans).

In addition, stainless steel and clear acrylic (with anti reflective film) are what designers might call ‘raw finishes’ .
Unlike painted or applied finishes, raw finishes have a neutral appearance and are more likely to fit into a variety of church interiors. It can be a traditional cathedral, or a modern warehouse church building, raw finishes will still look good. 

The Arc3 pulpit has a large 70cm (28”) wide top. Plenty of room for a large book of notes and a bible to sit side by side. If you need the top to be smaller, we can make a smaller 60cm/ 24” wide top for the same price. Please e-mail us.
The Arc3 pulpit and water table come standard with anti reflective film. This is particularly important if you have a projector screen behind the preacher (most churches do). Click here for more information on anti reflective film.

They come flat (keeps the parts safer and avoids the cost of sending air).  They require assembly. We provide the tools and we expect it to take you less than 5 minutes.

Like our other pulpits and tables, they are made by us here in Australia. It takes constant monitoring and problem solving to achieve our standards. We are pulpit specialists, so this is all we do. It takes commitment to this one thing to be able to make this difficult podium at all, let alone to a high standard. 

They are going to sit in the middle of your stage and your congregation are going to look at them every weekend. We need to be committed to do whatever it takes to get the best possible result. There is no way that this would be possible by sending it away to have someone else try to make it.

More about this church pulpit and water table package:

We tried 17 times to design a better pulpit than the Arc2.


16 times our select customers said they preferred the Arc2. It was fruitless and exhausting. I (Stephen) finally designed a pulpit shape that looked wonderful but was impossible to make. We spent thousands of dollars and many hours painstakingly hand making one. Our select customers loved it. They wanted to buy it. We had to find a way to make it at a reasonable price. 

We spent 2 years trial and error working out how to make it. It was impossible to make using conventional machines, so we had to make our own machines. We made machines from a metal cutting flame throwing torch, windscreen wiper motors from tractors and more conventional parts. In the process, we had 11 suppliers say that certain parts were not possible to make, produced 436 design drawings, and we set fire to a tree.

You get free covers for the pulpit top and table top, when you purchase this package. The covers are normally $40 each and are vital in protecting the tops when not in use.
 
SKU:
A3 & T3+C
Arc3 lectern and Arc3 water table package (with AR film)
$2,200

Freight

Freight

Freight Prices

To NZ To NZ-Express
$0-100 total order NZD $50 NZD $75
$100-500 total order NZD $70 NZD $90
$500+ total order NZD $100 NZD $150


Freight Times

To NZ
Standard air freight 4-7 days
Express air freight 2-4 days
- Orders are sent every Tuesday and Friday. This will affect the freight time.
   For example, if you order on a Friday afternoon, your order may not go out until the following Tuesday.
- NZ customs is normally very quick, but it may occasionally take extra time to clear customs.
- Freight times are a guide only. Actual times may vary.


You might be interested in...

NZD $650.00
About this plywood case for the Arc3 Pulpit

Who knew how challenging it is to make a versatile and strong plywood box?
We needed a strong case to securely hold the Arc3 podium. It has interlocking joints and is glued and screwed for strength. It...
NZD $400.00
About this plywood case for the Arc3 Table

In order to make a versatile and strong plywood box, we needed a lot of design thought and a clever method of making.
This case fits an Arc3 table. It has intergrated joints and is glued and screwed for...
i
n
f
o
@
p
r
o
c
s
o
n
.
c
o
m
tel +61 2 9718 0804

This website is for our
customers in NZ

Shopping cart

Your shopping cart is empty.